This item can be used directly onto the stove and then connect to the rest of the twin wall flue. 1000m pipe with an exposed telescopic connecting pipe built into the male end. This has a cover band and insulation to cover the connecting pipe. This can be used to connect directly on to a heating appliance and allows a clean streamlined finish to a stove installation. The disconnector section allows for easy removal of the appliance.
Twin Wall Insulated Chimney parts are secured together by using a Locking Band (sold separately).
Make sure that you keep a distance of 60mm from the outside of the flue to any combustible material (wood, plaster board).
Twin wall flue can be installed internally or externally
For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil boiler and any solid fuel appliances.
Outer skin is made from 304 grade stainless steel. Inner skin is made from 316 grade stainless steel. Insulation is compressed Rockwool.
Distance to combustibles is 60mm.
HETAS Approved and is CE marked.