More Views

6" inch Tee Cap

Product Code: 31-150-036

Excl. Tax: £26.99 Incl. Tax: £32.39

Qty:

| Add to Compare

Quick Overview

Tee cap. SW316-1mm Single Wall is suitable for use on applications fired by gas, oil and solid fuel with flue fas temperatures not exceeding 540oC, up to 750oC short firing.

Discover the full range of Connecting Flue Pipe

Details

Single Wall 1mm think stainless steel flue pipe is used to connect an appliance to either a chimney liner, stack or twin wall flue system. It can also be used to reline existing masonry chimneys. It is recommended that a verticle rise of 600mm should be allowed, immediately above the appliance before any change in direction. If bends are needed, then no part of a flue pipe should form an angle greater than 45° from the verticle, except where it may be necessary to use a very short horizontal section, not exceeding 150mm of flue to connect the flue pipe to a back outlet appliance. A maximum of 4 bends ( 2 offsets ) is permitted. Distances from combustible materials must be three times the diameter of the flue pipe. E.g. 150mm dm = 450mm clearance.