My Basket:

0 items £0.00
You have no items in your shopping basket.

0

Trusted Online Retailer

177mm-203mm Conical Increaser/reducer

Product Code: 1-175-ADP

Be the first to review this product

RRP: 82.34

£49.41
OR

177mm-203mm Conical Increaser/reducer

Details

Single Wall 1mm think stainless steel flue pipe is used to connect an appliance to either a chimney liner, stack or twin wall flue system. It can also be used to reline existing masonry chimneys. It is recommended that a verticle rise of 600mm should be allowed, immediately above the appliance before any change in direction. If bends are needed, then no part of a flue pipe should form an angle greater than 45° from the verticle, except where it may be necessary to use a very short horizontal section, not exceeding 150mm of flue to connect the flue pipe to a back outlet appliance. A maximum of 4 bends ( 2 offsets ) is permitted. Distances from combustible materials must be three times the diameter of the flue pipe. E.g. 150mm dm = 450mm clearance.

The URL of this page begins with https:// - this means that the page is hosted on a secure server and all transactions taking place are encrypted, so your card details are protected.

SagePay's online payment system is the most sophisticated available. All financial transactions are processed securely behind protected firewalls, allowing us to safely process your card payment with the bank. Financial details are never left unencrypted on any part of our system, and are never sent by Internet email.

×

Please wait...

Continue shopping
View cart & checkout
Continue shopping
View cart & checkout