Connecting Stove Pipes

Connecting Pipes - used to connect from the APPLIANCE to the CHIMNEY SYSTEM (either a chimney liner, stack or twin wall flue system). A vertical rise of 600mm should be allowed, immediately above the appliance before any change of direction.

We supply three types:

1. Vitreous Enamel stove pipe (Standard and Premium range available). This is an aesthetically pleasing product used to connect an appliance (e.g stove) to either a chimney liner, stack or twin wall flue system. The maximum length for vitreous enamel use is 1.8 metres and must not pass through ceilings or be used on outside walls. Suitable for gas, oil and multi fuel appliances1mm stainless steel. A single wall flue system manufactured in 316 grade stainless steel.
   
   
2. 1 mm stainless steel. A single wall flue system manufactured in 316 grade stainless steel, 1mm thick. As well as connecting to the appliance, it can be used to reline existing masonry chimneys. Suitable for gas, oil and multi fuel appliances.
   
   
3. Clay Adapters are only used to connect the appliance to the underside of an existing chimneystack, where no flexible stainless steel chimney liner is being used. Made from 1mm thick stainless steel